-
1. The raspberry pie sender is set to 1080P 30fps.The live video bitrate is maintained at about 13.7Mbit/s (greater than the maximum bitstream 13.2Mbit/s shown in parentheses) with a delay of about 3 …
-
Hello Guys,
EZW 1.6rc6
setup:
air pi zero awus036nha 2484
relay pi 3b with two awus036nha 2484 rx and relay on 2412
groud pi3b with one awus036nha 2412
Connecting screen on relay pi, we can …
-
RPI Zero 2 W (same BCM chip as RPI 3b) doesn't boot at all with the SD card image. It is as if there was no SD card present. Same SD card works fine on RPi3b. The card was reimaged just in case, but t…
-
Hi, I wanted to change the CCA threshold of ar9271.
I modified the ar9002_phy.h.
_#define AR_PHY_CCA_NOM_VAL_9271_2GHZ -20
#define AR_PHY_CCA_MIN_GOOD_VAL_9271_2GHZ -27
#define…
-
[debug.log](https://github.com/user-attachments/files/16593539/debug.log)
-
The list of wifi cards supported by ez-wbc is pretty old, and didn't evolve since 2015 !!
Many of the supported cards are old, or not manufactured anymore (especially dual bands cards).
There are no…
Yes21 updated
5 years ago
-
I work in a research group that examines coexistence issues between wireless networks on the ISM bands. We are using a Netgear WNDA3200 stick, which features an AR7010+AR9280. We perform packet inject…
-
Ubnutu正常安装8812EU驱动后识别出了8812EU并可以连接WIFI,在安装wfb(删除了key生成与复制,并从摄像头端复制GS.KEY到ETC目录下)后可以正常工作
![20240808_220422_HDR](https://github.com/user-attachments/assets/a709b701-0330-4a56-a283-43197537fc65)
在重启后使用…
-
https://github.com/libc0607/yjsnpi-broadcast-openwrt
-
Hi, i wanted to know, if we can hardcode frequency directly in firmware. There must be some register values set by driver that we may hardcode.
For example in following, what registers and what va…