-
I only changed the cashback of one of the CC to negative which does seem to be rejected. However, the reaction from the programme is excessive. My entire save data is wipied even the other components …
-
* Chip : W01
* Firmware : Wipy 1.20.2.r6
Hello , I have a program with 4 threads.
One of the four threads is listening to an input.
Following the state of the input[pin17=Pin("P17", mode=Pin.…
-
Hello Andrey
the guys at pycom.io have bailed on their promisses on creating a PyCharm plugin for their MicroPython boards. Would you consider adding support for these boards ?
Sincerely
Tim
-
The reset button in the IDE doesn't reset the board like removing the USB and replugging it does.
-
rshell 0.0.28
Windows 10 , driver : microsoft usbser.sys
Board : Pytrack (lopy4) , Pycom MicroPython 1.18.2.r7
Each time i try to get file from lopy i'm facing an error (exception)
I can do repl, …
-
Also improve the software update mechanism to have 2 user update files, this way, if a software update fails, the current firmware still remains active instead of falling back to the factory version. …
-
Power issue with step down cct have a solve just need to install it.
Seperate issue with code error for lounge fan switch requires further investigation.
-
I don't know if I'm missing something, but the way `bytearray` is used in the code is, as far as I can tell, not how bytearray actually works.
In C I would expect this paradigm because a strongly t…
-
I'm seeing this on a WiPy 2.0 running my own build of 1.11.0.b1. The only changes I made to the firmware was to add datetime into the frozen modules area. In the test case below I didn't even load dat…
-
WiPy 2.0
v1.8.6-650-g9bacbbd4 on 2017-06-09'
When I attempt to make a socket connection to a machine that is down the timeout value is completely ignored and connect() doesn't throw an exception.
…