-
### The problem
The Wled integration in HA is causing lag every ~10s on my wled ruinning on esp32c3 (tested on esp32s3 and same problem). This is very notticeable when using ledfx.
Disableing W…
-
Hello, after I had again massive problems with building because other projects need other versions of libraries like ArduinoJson: It would be great if you could provide builds via GitHub releases like…
-
With the firmware on this site and that shipped with my pico, presets won't save.
```
Uncaught TypeError: Cannot read properties of null (reading 'value')
at saveP ((index):207:49226)
…
-
### What happened?
All versions after 0.13.3 hang the board tightly until the power is completely lost.
I use python code that sends commands to the lamp via websockets about changing the mode and i…
-
anychange to work sp501e with wled or create an open API for home assistant?
-
**Is your feature request related to a problem? Please describe.**
I upgraded my WS2812B setup from Custom DIY Sinric Pro + WS2812BFX firmware to WLED, first thing I found was there is a lot of custo…
hplvm updated
9 months ago
-
### What happened?
I have two instances of WLED running on two separate ESP-12F (I believe they are 8266 based?) modules. To be specific, it's this [module](https://www.electrodragon.com/product/esp-…
-
FYI, "[ESP Web Tools](https://esphome.github.io/esp-web-tools/)" for ESP8266/ESP32 flashing is a free and open source project that is released and maintained by Nabu Casa as custodians of ESPHome and …
-
### What happened?
Hey guys,
it seems that the Loxone-specific commands (&LX=) are not working.
Installed the "normal" 0.13.3 from @Aircoookie and it works flawless.
Changed back to SR-013.3 and…
-
Remote control ESPixelStick effects using DMX --> E1.31
I think of something like https://github.com/Aircoookie/WLED/wiki/E1.31-DMX#3-effect
Actually it's possible to send RGB values for each pi…