-
Instead of spawning a whole new wpa_supplicant instance it might be useful to re-use the already running one via D-Bus (fi.w1.wpa_supplicant1), similar to how NetworkManager works. That might help wit…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi
On ready your instructions on changes to 10-wpa_supplicant file, it is not clear to me whether your text should be inserted, replace something or replace the whole file.
It appears that the <…
-
Host
- iMX8QXP
- SPI Protocol
- Kernel: 5.10.9
Slave
- CHIP: ESP32S3
- Branch: master (70de43ac9cc30ef55960d8025274df7a0fe1dfc8)
> [ 12.667950] esp32_spi: process_esp_bootup_event: Receiv…
-
supplicant2.10 with openssl3.0.7
Describe the question:
Hi,When I used supplicant2.10+openssl3.0.7 to test connecting to an 802.1x network, I got the following results:
PEAP+NONE:failed
PEAP+MSCHA…
-
I recently upgraded my AP's hostapd configuration from 802.11n to 802.11ac. Everything is working except for Android phones' ability to authenticate with the AP reliably. This issue was not present wh…
-
Hello,
I have a problem of wifi not associating with the AP, in some of the boots. It is configured and it works, but in some of the time the wifi will not associate. I have to connect the ethernet…
-
I would like to connect my Raspberry Pi with piSignage to our WPA2 Enterprise network at school. If I use Rasppbery Pi OS (Bookworm) I can connect to the WiFi.
Adding the following to `/etc/wpa_sup…
-
Hello,
In file wpa_supplicant.conf:
> ctrl_interface=/var/run/wpa_supplicant
> ap_scan=1
> network={
> ssid="your_wifi_ssid"
> scan_ssid=1
> proto=WPA RSN
> key_mgmt=WPA-PSK
> pairwise=CCMP TKIP
> g…
-
https://docs.ansible.com/ansible/latest/collections/community/general/xbps_module.html
https://docs.ansible.com/ansible/latest/collections/community/general/runit_module.html
setup wifi for provisio…