-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration i…
-
Hello,
I own an "ELEGOO Smart Robot Car V4.0 with camera" and tried to use this project to access the video stream from the camera module.
However I wasn't able to get the camera working, proba…
-
So, i've looked though all issues etc, I still cannot find a solution to this.
- I've selected the right board in the appglobals, as far as I can see,
- I've attempted formatting the SD in differe…
-
### Board
ESP32-Wrover-E
### Device Description
ESP32 Wrover-E, 8MB psram, 16mb flash
### Hardware Configuration
Lan8720
psram
i2c
spi
### Version
latest master (checkout manually)
### IDE …
-
I've been trying to install the pre-requisite for configuring ESP32 WROVER on my linux os (Ubuntu 22.04). In this, I had followed all the steps based on the tutorial by installing thonny IDE and then …
-
Did not work with default settings. The following works:
```
// ** Set the correct configuration for ESP32-WROVER-KIT v3
// --------------------------------------------------------
//#define DE…
-
I tried running
```
./tools/configure.sh esp32-wrover-kit:lvgl
make
make distclean
```
and got next output with `distclean`:
```
make distclean
find: ./lvgl/demos: No such file or directory
…
-
Warning, GPIO16/17 aren't usable (see ESP32-wrover-b datasheet), they are connected to PSRAM : https://www.espressif.com/sites/default/files/documentation/esp32-wrover-b_datasheet_en.pdf#page=19
Ho…
-
there are incompatible wrover boards, that give you flash errors and/or only boot when holding the boot hardware button.
This was discussed here (https://github.com/sle118/squeezelite-esp32/issues/…
-
despite what the readme claims, by checking the code here it seems this could also works with boards without psram:
https://github.com/tobozo/ESP32-PsRamFS/blob/main/src/pfs.c#L102
I've just teste…