-
https://github.com/xmos/lib_ethernet/blob/ef4400db6a39172a2d1f75cb908ca08170c3363c/examples/AN00199_gigabit_ethernet_demo_explorerkit/Makefile#L28
This Makefile builds two complete builds and xe's …
-
This issue covers a few point points on the example makefiles - as commented on https://github.com/xmos/lib_i2c/pull/68#pullrequestreview-599785771
- Makefiles are mixing architecture naming (xs2/…
xross updated
3 years ago
-
If MIDI is enabled in "xua_conf.h", two problems are found:
Problem 1: The MIDI packet at full speed should be 64 bytes
Problem 2: If no driver is installed, the device will be abnormal in the windo…
-
1、Hardware part
We obtained hardware design information and firmware information from the open source website https://github.com/introlab/16SoundsUSB. The first version produced five development boar…
-
Brinkmann Audio Nyquist DAC is also XMOS based and supports up to DSD256 native.
VID: 0x20B1
PID: 0x3093
-
I install the hidapi.
and run the python listen_and_get_position.py.
But there is index error.
Could you have and idea to fix?
-------------------------------------------------------------
jaehoo…
-
Starting from I2S slave, I've written a TDM slave implementation.
It still doesn't support sync_len!=1 and offset !=0.
It has been tested for 2, 4 and 8 channels.
[tdm_slave_impl.h.txt](https://gith…
-
Hi,
I am using ubuuntu 16.04 with python2.7 and the Respeaker Mic Array v2.0. I have a ValueError when I try to update the firmware.
Here is the error:
```
john@ubuntu:~/catkin_ws/src/respeak…
-
This was started by @DaveAtkinsonXMOS. Here are some references:
Link to issue on CMake gitlab server:
https://gitlab.kitware.com/cmake/cmake/-/issues/12521
Initial discussion with CMake Devs …
-
### Initial observation:
Loopback testing of 2AMi2o2xxxxxx on macOS was failing the ramp test with large discontinuities.
- Manual testing shows that macOS defaults to 44100 16-bit profile for this…
TDW89 updated
5 months ago