-
This idea is to provide a OPL3 core which can be customized by user profiles.
This could serve to establish profiles which are nearer to parcular synthesizer cards:
example "ESS" profile, "Adlib",…
-
**[Original report](https://bitbucket.org/djtubig-malicex/opl3-synth-driver/issue/38) by Wohlstand (Bitbucket: [Wohlstand](https://bitbucket.org/Wohlstand), GitHub: [Wohlstand](https://github.com/Wohl…
-
https://shop.sudomaker.com/products/retrowave-opl3-express
RetroWave OPL3 is a hardware with MCU and OPL3 chip, it can be connected to computer via usb.
A program is shown here to play VGM using Ret…
-
### Are you using the latest Dosbox-Staging Version?
- [X] I have checked releases and am using the latest release.
### Different version than latest?
_No response_
### What Operating Syst…
-
@Wohlstand thanks for setting up this organization and repository. You'll probably need to keep it going if libgme is going to keep progressing so please consider yourself fully blessed to run the pr…
-
YMF262 clock is read as 3,579,545 Hz despite the VGM file having the correct clock speed of 14,318,180 Hz at the correct offset in the file.
-
Hello!
Since you have the using of libADLMIDI synthesizer, I also suggest you add another synthesizer called libOPNMIDI:
https://github.com/Wohlstand/libOPNMIDI
It's very similar to libADLMID…
-
I've found that many OPL3 tracks have stereo, whereas the SD-1 is mono. So use two SD-1 combinations to achieve stereo.
-
* Your Windows build number: Microsoft Windows [Version 10.0.16299.125]
* What you're doing and what's happening: Building mame2003 from this repo https://github.com/libretro/mame2003-libretro
…
-
For hardware accuracy, all 18 or 20 channels should only be present if 4-operator mode is disabled.
The only hardware modes supported on a real OPL3 are:
- 18 2-op channels
- 6 2-op channels, 6 4-o…