-
Hi Dave
I got a xberry pi a couple of weeks ago and I think BubNext is the best open source game for it yet. Great job! I'm sure it wasn't easy.
Do you think you might ever attempt to port anoth…
-
Detect R800 mode before detecting the EPCS4 device and switch to Z80 mode in C2FWUPD utility. In R800 mode cartridge is unstable and updating the firmware may be risky
-
Hi,
It is just a question about feasibility.
Could the Snek could be compiled for Z80 based system? (having 64K based RAM, 32K ROM at most, 8 bits CPU).
Thanks,
Dominique
-
hi. don't know how to write to you in another way.
in your opinion is possible to build a .z80 loader? for the porpuse maybe only 512bytes of the initial rom could be enough so you can freeup some pi…
-
**Reported by manuelbi on 2008-11-22 15:25 UTC**
This IRC fragment says it all:
<Quibus> n_n: still want test2?
<n_n> on the nec, yes :P
<n_n> i assume it will work fine though
<n…
-
cuando llamas OUT (C),0 en los z80 cmos lo que hace es sacar el valor 255, no el 0
-
In the beginning ...
There was darkness.
I said "Let there be a home brew Z80 computer!".
And so it was ...
But it has no software to run .... BOLLOCKS!
-
I Got some errors trying to load .z80 files
1 - If you dont have the .scr file in / directory, I got an exception after press F3 key
2 - With .scr files in / (with .z80 files also) I got another…
-
When openMSX receives a key-off or key-on write, it immediately starts or releases the envelope. As you can hear in the attached test case [keyoffon.zip](https://github.com/openMSX/openMSX/files/12837…
-
Based on a comment in z80.h it looks like there are plans to implement the RESET pin, but I am curious if there are plans to emulate the BUSACK and BUSREQ pins (useful for Sega Mega Drive).