-
Zigbee is becoming the de facto standard in home automation. It would be great if `OpenMQTTGateway` could support this protocol. Below I have a write up about the most promising solution at the moment…
-
Hi @lhespress
thanks for this great addition to zigpy!
i would love to see a manual/setup instructions for the hardware and example zigpy commands to test whether the setup works in the README.…
ss89 updated
5 months ago
-
https://wiki.sipeed.com/hardware/en/maixzero/m0s/m0s.html
-
### Problem
Hi, i have a [TS0004 4-gang switch](https://www.zigbee2mqtt.io/devices/TS0004_switch_module.html) and I have problems. When I press the physical button, everything works good. When i pres…
-
Any tips on SWD flashing a standard Silabs bootloader FW on Ebyte E180-ZG120B-TB evaluation board and E180-ZG120B module?
* https://www.cnx-software.com/2020/04/27/ebyte-e180-zg120b-tb-zigbee-3-0-e…
Hedda updated
3 years ago
-
I know it's a long shot but would it be possible to generate a router-capable firmware for the EFR32 device on those cheap E180-ZG120B-TB dev boards? Like @tube0013 , I have too many coordinators layi…
-
Hi, first wanna tell you that its really nice work your custom firmware to stm32 ikea fyrtur blind roller. But Im writing you for some help, my blinds with stock fw suddenly stop working (no LED, comp…
-
Has anyone confirmed if this Zigbee coordinator firmware updater image from @walthowd is compatible with ITead’s new “Sonoff Zigbee 3.0 USB Dongle Plus V2” model “ZBDongle-E” based on Silicon Labs EFR…
Hedda updated
2 years ago
-
This request comes a little ahead of its time since this ITead Sonoff ZBBridge-P is not available to buy yet, but it will be soon ;)
https://community.home-assistant.io/t/itead-sonoff-zbbridge-p-co…
-
@Daniel-zhan-itead @liangjia2019 @guozi7788 can you please forward a hardware request to ITead/Sonoff product managers?
I would like to suggest that you look into making and selling an upgraded va…
Hedda updated
5 months ago