-
Firstly thanks for posting the details of the design! Currently I am trying to build myself a version with RS232 port and external antenna based on your "RPi shield" design. However seems like I am no…
-
# Bug Report
## What happened
After changing coordinator to slaesh’s CC2652RB stick I'm unable to control lights by its group. I'm getting `Data request failed with error: 'No network route'…
-
Hello Gary.
We saw issue with request: https://github.com/grobasoz/zigbee-firmware/issues/6
Can you cooking a Zigbee router mode firmware for P series - Perfomance Silicon Labs EFR32MG1PxxxF256( …
-
Hi,
I have an ebyte e22-400t30d module. This module is based on sx1268 chip and has uart interface. It's easy to program, but there is no access to the sx1268 chip settings. I want to establish commu…
-
Hi @Koenkk,
The Ebyte E79 modules have a different RF arrangement than the current `CC1352P2_CC2652P_other_coordinator` firmware, the PA is used for sub-GHz instead of 2.4GHz (the opposite of the c…
omerk updated
3 years ago
-
Heya.
Just trying to compile this cool program for a based armv6l raspberry pi. zero/w
and I've hit a pretty obvious issue.
```
[ 84%] Building CXX object CMakeFiles/loraftp.dir/src/tools.cpp…
-
I have a Dorji SX1262 (868) I can't make it work in RX mode. The TX is working "SX126x_Transmit.ino" using "lora.setTCXO(1.6);"
ESP32 with Dorji DRF1262 (DIO2 not connected)
My RX sketch (not work…
-
## Information about the device + link
Aqara motion sensor T1 (RTCGQ12LM; lumi.motion.agl02)
It has 1 parameter for customization:
- Detection period (2-199s, step: 1s) - although stated 1-…
Otnow updated
2 years ago
-
Hi,
I have two NodeMCU V2 and a pair of E32868TD.
Using this library I can't connect correctly the E32 with MCU.
[There are the connections](https://pasteboard.co/JTyd9h1.jpg)
I have trie…
-
Are these typo errors ?
...
We can use directly a **SoftwareSerial** with another constructor
LoRa_E32(**HardwareSerial*** serial, UART_BPS_RATE bpsRate = UART_BPS_RATE_9600);
LoRa_E32(**Hardw…