-
I have a heat pump which will run with reduced efficiency for every hour of production which is postponed. I used strategy-best-save with a minimum saving threshold of $0.50 per hour (average).
Let…
-
Have anyone made any visualization of the schedule in NodeRED (dashboard)? (I´m a non HA user)
-
### The problem
I have a Fairland Heatpump inverter which is connected to Tuya. It is reporting the current temperature as -22 degrees celsius, while that is not the case.
I looked in the IoT plat…
-
I decoded values for the VWZ MEH 97/6. I was mainly interested in the parameters for the heating rod (Heizstab) which can not be read and changed via 08.hmu. A separate csv for the VWZ is required. I …
-
It would be super nice to be able to pull even more data. Important metrics like WaterFlow, CompressorFrequency, WaterOutleet, WaterInleet provides valuable information.
Se poblished topics of this…
-
The electric measurement of the Jeisha is not very accurate: it is better to use an external counter, which can be attached to the Heishamon. I prefer this way and implement the attached solution - at…
-
Hi,
taking this recent PR as starting point [(solar panel)](https://github.com/BrickSchema/Brick/pull/248) which conceptualized solar thermal panels or collectors, here are further components I iden…
-
Hello,
I'm trying to read (and, in the future, write) the RX pin of a nodemcu and I can't read anything. I'm sorry but I don't know if there is some missing in my configuration. I can connect to th…
-
### Describe the feature
Ability to control the Cosy 6 heat pump
### Expected behaviour
Ability to toggle the heating/hot water via the octopus API with the Octopus heat pump Cosy 6 Octopus
### Us…
-
Hi,
These days, my ATAG CH is usually running in clock and winter mode.
I experience the following issue:
On my ATAG app, I can read and manually adjust the target temperature, but in HA this d…