-
External API functions shall provide a means to:
- Inform libbladeRF that the XB-200 is attached and should be used
- Band selection (including bypass)
Under the hood, the library should allow for tu…
jynik updated
10 years ago
-
FPGA loads are intermittently reported to fail by libbladeRF, despite the FPGA actually loading (as indicated by LEDs).
This is due to a timing issue, where the FPGA isn't loaded when end_fpga_progr…
jynik updated
10 years ago
-
root@ubuntu:~/bladeRF/linux/apps# make
Package libbladeRF was not found in the pkg-config search path.
Perhaps you should add the directory containing `libbladeRF.pc'
to the PKG_CONFIG_PATH environmen…
-
Since last updates, lib does not work anymore.
example
libbladeRF_test_sync --verbosity verbose -o testfile -s1M
[DEBUG] RX Frequency = 1000000000, RX Samplerate = 1000000
Floating point exception (c…
f4gkr updated
10 years ago
-
This appears to return bytes, rather than # of IQ pairs sent, which contradicts the interface defined in libbladeRF.h.
For, example I'd expect the following to return 1024. However, it will return 4…
jynik updated
10 years ago
-
libbladeRF needs to make it more clear that a potentially incompatible set of items (FPGA, firmare, libbladeRF) has been loaded. This is a serious usability problem that's fallen by the wayside in fa…
jynik updated
10 years ago
-
Even when I pass "-DBUILD_DOCUMENTATION=ON", cmake detects that I don't have the correct deps installed, and simply ignores the user input and continues to build.
While an acceptable default is "buil…
-
It has been reported (thank you, piranha32) that the LMS VTUNE occasionally does not lock.
Brian, assigning this to you. We were chatting about the loop conditional here possibly needing to check for…
jynik updated
10 years ago
-
Not yet confirmed - noticed this while working on a712304f02b49dd53c042ddbad715ae2ff434adb, jotting it down here as a reminder for further investigation.
If the device is tuned in a manner that chang…
jynik updated
10 years ago
-
The following functions should be added to our CMake checks so that we can provide useful configuration-time error messages about libusb being too old, rather than blow up during compilation:
- libusb…
jynik updated
10 years ago