-
When building rpi-3 (i.e. brcm2708_bcm2710) images with kernels newer than 4.4.x (hedy-1.0.0-rc1+openwrt-17.01 use 4.4.x; hedy-experimental+openwrt-head use 4.9.x), our default setting
``CONFIG_STRI…
-
Hi,
I'm getting "Unable to write to device" any time I try to use the -d or -u options. Getting the serial on ykush3 works fine.
$ sudo ykushcmd ykush3 -l
Attached YKUSH Boards:
1. Board found…
-
There are currently 2 issues with Libra 2.
1. Loopback does not get set up and must be set up manually (https://www.mobileread.com/forums/showthread.php?t=353887)
2. There are DNS lookup issues? p…
yafyz updated
4 months ago
-
I'll be adding thermite to the faster_path project soon. I was wondering about [cross-compile](https://github.com/japaric/rust-cross) support with Rust. Here's a list of Rust's target systems they s…
-
hi @z3ntu,
what's the current status of the project?
I've two Foxconn modules (T77W968 and T99W175) that have embedded eSIM, but no AT commands to use with LPAC, so only way is to send APDU thru Q…
-
Hi.
Can you add more supported platforms in releases ? armv7 & aarch64 (android), MIPS (le), etc?
-
### Checklist
- [X] I've looked through the [issues and pull requests](https://github.com/cross-rs/cross/issues?q=) for similar reports
### Describe your issue
After bumping tokio from 1.23.0 to 1.…
-
Hello,
First of all, thanks for this tool, I use it extensively for my projects, well done !
After the cross compiler is built and installed inside the `OUTPUT` directory, I noticed Libtool `*.la*` …
-
Hello.
I'm trying to cross-compile microsocks for android 5.1.1 with arm-linux-musleabi-gcc (from musl-cross-make). Compile is okay, but have issues with execute on my device.
Firstly i got erro…
-
*torte71:*
Target: brcm2708_bcm2710 (rpi-3)
Affected openwrt revision: git-head (26045049baf646aa2ce3dce78106da5acf4936ea)
(openwrt-17.01 is not affected)
* Reproducing
git clone https://gi…