-
Yesterday compile 6.1 master tasmota with 2.4.1 and voltageset, currentset, powerset do not work.
Voltageres etc works fine.
Sonoff basic R2
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
-
Hi.
After installing esp32 in arduino IDE using the updated method ( not the old git method), the pzem-004t sketches can not be compiled.
It worked before when i was using the old method to install …
-
Hello!
Just to have it clear: this one here is sibling of feature request #1583 :grin:
I wonder if it would be possible - as there are already a couple of custom binaries (more than 100?) and s…
-
1. Переменные
byte TimeAdresseD = 9;
byte TimeAdresseN = 11;
ни где не используются, хотя вроде бы завлено кооретирование времени в блинке.
2. Где в скетче активная мощьность какой принцип расчет…
-
hi, is there PZEM004T support in the DISPLAY precompiled firmware? I'd like to add a 1602 i2c display to show actual values of the PZEM004T sensor...
or, how to know what features are enabled in st…
-
Hi!
I'm working on a project that has 3 PZEM004T sensors connected to the same UART. They have addresses and only respond when the message is directed to them.
My schematics is like this:
![1e…
-
- [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
- [x] Searched the problem in the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting)
- [x] …
-
I am to use a pzem with SonOff basic on tx and rx. I have add a resistor how tutorial but the SonOff send result for 4hour a after go in lock to send. The SonOff work but not send result about pzem. I…