-
*markuznw:*
Hello, there appears to be a bug in the current revision (tried up to r731) with my Lantiq Tp-Link W8970.
I'm using a PPPoE configuration with an atm bridge 8/35 for a typical 10mbit ads…
-
*juanriccio:*
Lede r1735.
I have ntp client and server enabled in LuCi, and my /etc/config/system file has it enabled too, as expected.
config timeserver 'ntp'
list server 'openwrt.pool…
-
*juanriccio:*
Lede r1735.
I have ntp client and server enabled in LuCi, and my /etc/config/system file has it enabled too, as expected.
config timeserver 'ntp'
list server 'openwrt.pool…
-
*jimbof:*
The switch port numbers in LEDE / OpenWRT do not correspond to the physical ports, which is confusing to an end user.
This is the current layout
Switch Physical
4 LAN 1
1 LAN 4
…
-
*jimbof:*
The switch port numbers in LEDE / OpenWRT do not correspond to the physical ports, which is confusing to an end user.
This is the current layout
Switch Physical
4 LAN 1
1 LAN 4
…
-
*bill888:*
LEDE Project r742
BT Home Hub 5 Type A with WAN port (port 5) enabled as a DHCP client, connected to existing LAN (subnet 192.168.1.x)
Client wired to Home Hub LAN port can initially…
-
*bill888:*
LEDE Project r742
BT Home Hub 5 Type A with WAN port (port 5) enabled as a DHCP client, connected to existing LAN (subnet 192.168.1.x)
Client wired to Home Hub LAN port can initially…
-
*jon.grossart:*
It seems that devices ported to the new image building system in LEDE aren't working correctly. Specifically, packages specified by the DEVICE_PACKAGES variable aren't being included …
-
I have the same problem as another issue that was closed. The image gets corrupted but it is blocked that are out of place. Sometimes the blocks have different brightness, suggesting that the blocks c…
-
*None:*
Archer C7 v2
LEDE r1953 with/without ad51e09fd1301484820a466a49447a34d7504882.
I've encountered a difficult to pin down problem with certain devices interacting with recent revisions…