-
I have two identical Raspberry Pi 2 Setups, both with the latest noobs distro and PiTFT capactitive touchscreens. I followed the instructions here for setting up adafruit-pitft-helper, and the first o…
-
I'm having a hard time displaying anything on my Adafruit 2.8" display on an Intel Galileo gen 2 with a 3.4 kernel. I just get get a blank white screen.
I can't quite see where my problem is, since I…
-
Hi!
I have an Adafruit 2.8in LCD with a resistive touchscreen [1], connected to a Raspberry Pi and working with Kivy. I have had to use fbcp [2] to get this setup to work with Kivy, but that is fine.…
-
Hello!
The PiTFT35R_raspbian image provided in the "easy install" procedure
is working "OK" (in that the TFT panel properly display the console and the
X desktop when manually started).
However, rec…
-
Hello,
I'm using yocto to create my distro for raspberry pi everything is ok, except one thing that i don't understand, as you can see in picture below, the fbtft_device module is loaded ok at around…
-
you have to for the touchscreen to work for '28r and '35r type PiTFTs
for the '28c add "ft6x06_ts"
for the '22 it has no touchscreen
-
Sir
I need to include piTFT display driver to rpi-hwup-image? how to do it? please specify steps to do it....
please help
-
Have the current PiTFT 2.8" module from Adafruit but it doesn't work with 3.15 branch (and the patch available for download from Adafruit fails on "matching" mainline). The raspbian 3.12 kernel works…
-
I dug around in the code and found the line that it edits, but it would be nice if, once you use the tool to enable console access to the PiTFT, you could also remove it (and revert back to HDMI). Cur…
-
A fresh pull of your code gives:
```
root@MusicBox:~# python /root/pmb-pitft/pmb-pitft/ui.py
0.17.0
Traceback (most recent call last):
File "/root/pmb-pitft/pmb-pitft/ui.py", line 175, in
sign…