-
With the newest version my zigbee2mqtt doesn't work any more.
I get this in the logs:
```
zigbee2mqtt:info 3/11/2019, 7:53:43 AM Starting zigbee-shepherd
zigbee2mqtt:error 3/11/2019, 7:53:5…
-
I tried to get one dual wall switch to work but it seems not working. With Phoscon App I can see the switch connected as Vendor LUMI/Product Transmitter 2-gang. But when I look at Groups it doesn't sh…
-
This is an issue i have found but no viable solution to this. The reporting of open/closed works fine which seems to be odd if you look at the screenshots from the GUI below:
Version info:
Pr…
-
-
Hi,
ShortcutBadger says that to support Xioami Miui > 6, the code must follow their example on this page:
https://github.com/leolin310148/ShortcutBadger/wiki/Xiaomi-Device-Support
Original code…
-
can you check the xiaomi battery handling. my sensoers and switsches has wrong batt percent
![grafik](https://user-images.githubusercontent.com/6681528/42489434-3dcc3894-840b-11e8-9129-7f2239857ae5.p…
-
### Outline
I've been able to find and add two aqara devices (a temperature and humidity sensor and a door latch sensor), but in Openhab it says that device disovery is not completed.
### Configur…
-
Hi,
This is the configuration I got:
## Start syslog (0/1)
ENABLE_SYSLOG=1
## Total Disconnect from Xioami servers, includes disable of streaming and OTA updater (0/1)
DISABLE_CLOUD=0
## Manag…
-
I have tested the coordinator firmware for quite some while and are happy with it in small scale.
In my living room the owner before us mounted 48(!) GU10 spots in the kitchen/livingroom spread on …
large updated
5 years ago
-
Hi,
I've been trying to do this to hack it and didn't know exactly what I was/am doing.
I have cleared an SD card and formatted to Fat32, copied cfw-1.0.bin to the card and renamed it to demo.bin.
…