-
Using BTT SKR MINI E3 V2.0 + BTT TFT35 V3.0 on Ender 5 Plus
Was working for a few days, no issue. Suddenly Part Cooling FAN0 is on at 100% all the time and cannot be controlled by screen, BTT Mode or…
-
Hi All! I have troubles with my BTT 3.5 tft v3 and SKR 1/4T
in marlin mode i see SD insert and removed when i insert and remove SD card but see NO Media when i want to print from SD.
In BTT mode whe…
-
Please consider disabling M122 / TMC_DEBUG in firmware by default as per @morningreis guide with tweak for SKR E3 Mini v1.2:
- https://www.reddit.com/r/ender3/comments/dojh3v/guide_for_those_upgrad…
Hedda updated
4 years ago
-
Hi,
I would like to know if it's possible to use this display with this board and how should be the configuration file to make it works.
From now with the default configuration I'm only able to se…
-
Hello all,
I'm complete new to 3d printing and also to code and firmware's. I use a Creality Ender 3 pro.
I do want to apologize before for any inconvenience that I'm causing asking this questio…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Hi Community,
I got an issue with the Creality Ender-5-plus.
Currently I am updating the …
-
Hello,
please add the EBB SB0000 Schematic -> BIGTREETECH EBB SB0000 CAN V1.0_SCH.pdf
Thanks
-
So i just bought SB2240 directly from BTT site, unboxed it and plugged straight to the USB cable remembering to put the 5V jumper on. I wanted to enter the DFU, but nothing is happening after holding …
-
I have an issue with my skr2 revB
I was working with the regular hot end heater (red one) for months, two weeks ago i switched to 50w ceramic heater
today when i was printing like regular the screen…
-
When engaging any of the stepper motors (i.e., X axis, Y axis, Z axis, Extruder) the fan remains off.
**Expected behavior**
Fan1 (control board cooling fan) should run when any of the stepper …