-
Hi,
Please let me know if there is some way to check transmission Quality in E32 because I think they have no RSSI or SRN...
Thank you
-
Please consider looking at using Sonoff ZBBridge as a networked Zigbee adapter for zigpy & bellows
- https://www.itead.cc/sonoff-zbbridge.html
Would be very cool if we could use this new Sonoff …
Hedda updated
3 years ago
-
When setting up the firmware for use with the EBYTE E18-MS1PA1 it looks like the corresponding .txt file saves the setting. Nevertheless, this setting is not restored after pressing the 'read settings…
-
The CC2531 does not seem to have as good range as my Xiaomi hub.
Using same type of Xiaomi sensor (new generation reed switch sensor - MCCGQ11LM) I found that the CC2531 is failing to receive updates…
-
This is a feature request asking for zigpy or a dependency "network bridge/gateway" library to support making serial connections to remotely connected Zigbee adapters over your local-network over TCP/…
Hedda updated
3 years ago
-
According to this [comparison table](https://infocenter.nordicsemi.com/topic/struct_nrf52/struct/nrf52.html?cp=4), it looks like the nRF52805 has a subset of the functionality of the other nRF52 modul…
-
Maybe you can make version compatible with 32 bit stm L0 mcu ? Or maybe event something really small and unique stm32wle5 with embeded lora chip…?
Kris
-
Since the E-Byte E800-DTU (http://www.ebyte.com/en/product-view-news.aspx?id=524) ZigBee modem runs on a CC2530 and uses RS-485 interface, i would imagine it could be supported by Zigbee2mqtt on a Ras…
-
Thank you for great library for SX126X chips. I am trying to build a PCB using above hardware. I need to have ST7789 TFT display, a MicroSD card socket and SX1262 Ebyte module in my project. I also ne…
-
## What happened
This is the weird thing, I really don't know. I have about 50 devices on my Zigbee network another 10-15 on Hue, and about another 10-15 on another Zigbee network (SmartThi…