-
I used to be able to flash a WeMos D1 mini (CH340G on macOS) with 921'600.
```
esptool.py v2.0.1
Connecting....
Detecting chip type... ESP8266
Chip is ESP8266
Uploading stub...
Running stub..…
-
#### Hardware: ESP-12
### Problem Description:
The Example below is adapted to work but WatchDogTimer Resets the board and dumps the stack when the delay-commands are removed or when you inc…
-
**_Reported by Robert Beatty:_**
As a developer I would like to be able to develop using ESP32 chips so that Zephyr can be run on LX6 CPUs.
ESP32 is a dual-core system with two Harvard Architectur…
-
- Arduino board: Arduino uno
- Arduino IDE version: 1.6.5
- List the steps to reproduce the problem below (if possible attach a sketch or
copy the sketch code in too):
I compiled the adafru…
-
Hello,
I'm using the ST_Anything_Multiples_ESP8266WiFi.ino sketch on a Huzzah Feather 8266 board. Everything *except* the buttons are showing up in my SmartThings app.
Is there any reason why t…
-
Hi All,
I am trying to flash the bootloader on ATmega328P using the following:
- ESP-12S (using the Feather HUZZAH board)
- ATmega328P (using an Arduino NANO clone)
- Arduino IDE
What I did s…
-
On Win10 w/Creators Update. (15063)
After restarting a sleeping or hibernating laptop with two instances of VSCode running, .vscode/arduino.json and .vscode/c_cpp_properties.json files have been ad…
-
### Basic Infos
#### Hardware
```
Hardware: ESP12, Adafruit Huzzah Breakout and Feather Boards
Core Version: 2.3.0
Computer: Dell, Intel Core i7 CPU, 870 @ 2.93Ghz, 16.0 GB RAM
``…
-
I'm using two I2C components with an ESP8266 running StandardFirmataWifi, a LED Matrix with HTK16K33 and an ADXL345 Accelerometer. Both appear not to be working, in the case of the LED Matrix it stays…
-
I've setup the sensor with a Adafruit Feather HUZZAH (ESP8266) and can read data for a while (1-3 days) then suddenly i only get 65k capacitance and invalid temperatures. The connections are soldered …