-
I can not figure out how to write a sketch to work with the hardware serial (RX/TX pin) on ESP8266. Could you add an example? Thank you in advance!
-
Greetings! We are currently working on a project involving 2 meters PZEM0004T interfaced with an Arduino Mini Pro. Your library has been of a great help. Thank you!
We set up the system to work wit…
-
I have bound a Wemos D1 mini to a PZEM016 and configured the tasmota as in the guide, but D1 keeps restarting like every minute , with 10.000 reboots per day.
Reason for reboot is a fatal exception.
…
-
Originally reported by: **Pavel Sláma (Bitbucket: [pilotak](https://bitbucket.org/pilotak), GitHub: [pilotak](https://github.com/pilotak))**
----------------------------------------
PZEM-004T is non…
-
Hello guys,
I have one sensor working with an Wemos D1 board, everything is fine with that, but today I struggled a few hours to start working with the WROOM-02 board, I first made the layout of th…
-
Looking at some tracing logs, I can see the following MQTT subscriptions after a restart. Anyone know what the purpose of MQTT topic #012 (see last log entry) is ? I'm not even sure if it's formatt…
-
When i compile on ESP8266/ESP32 , it occurs warning like the folowing message.
----------------------------------------------------
WARNING: library PZEM004T claims to run on (avr) architecture(s)…
-
The problem is that during restart of the sonoff 4ch pro R2, the relays are turned on during the boot process. that is causing unwanted behavior with the garage door. Searched in the forums and find s…
-
pzem004t use tasmota 5.10.b/g , diy esp8266 tasmota ,data have output a time ,then no data output all is 0V 0A 0W 0W 0 W , i switch pzem004t rx tx to espeasy ,is ok, so why ?
-
**IMPORTANT NOTICE**
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so th…
rt400 updated
5 years ago