-
Hi,
i'm using RADDS on a original Arduino Due with 5 TMC2130 Steppers from Watterot (the original ones für 3,3-5v) connected on X,Y,Z, E1 and E0. E1 is for the Second Motor of my Z-Axis.
I'm not…
-
It is a top priority to get the control system working smoothly, and that we have solid/reliable controls.
**CAN API**
***Next Steps***
- [x] The CAN API should report as much telemetry as po…
-
I just recently got the SKR V1.3 for the wiring simplicity and 32 bit stuff. Sadly, this has also created a few issues. The SPI jumpers are in the correct places and the +5V is in INT like it is suppo…
-
### Is your feature request related to a problem? Please describe.
No
### Are you looking for hardware support?
TMC 5160 - integrated motion controller
### Describe the feature you want
Currently…
-
I am new in Arduino. Below are the steps I have performed.
1. Uploaded grbl header in Arduino.
2. attached CNC shield with Arduino.
3. Using DRV8825 as stepper driver for NEMA17 steppermtors. Vre…
-
When trying to operate my cnc the X-Axis will switch directions no matter what direction the command is given in (i.e. if it is told to step 10 mm in the minus directions 5 times after the 3rd it will…
-
Currently the drivers seem to determine which resolutions (dpi) are available, probably the ones presented in the resolution dropdown. I might have forgot the reason, but why are we still allowing oth…
-
@anderson2981 ran into an error in the wall-enabled prediction driver when using `compiled_lsrk45`:
```
File "emirge/mirgecom/mirgecom/steppers.py", line 425, in advance_state
_advance_stat…
-
Hi,
I tried to upgrade my SKR-mini-E3 v1.2 to the latest version from this site. After loading the firmaware as here described, I get an error TMC Connection Error. I searched the Internet for help…
-
Hello andrew, thank you for this code.
i am totally new here and hope this is the right way. i only have a M5 stack fire without shield for the motors, so i loaded your code on a ESP32dev board and a…