-
### Issue related to
Sunsynk / mbusd Home Assistant Add-On
### Describe the issue/bug
Error message trying to start add-on and saving config:
Device /dev/ttyAMA0 does not exist in Sunsynk/De…
-
Hi All,
using Solarman integration installed via HACs, version 1.5.1.
For some time already have a Deye Sun600 integrated and working quite well.
Yesterday added a recentley purchased Deye Sun160…
-
Hi,
I am trying to run the solution on Windows 10. I managed to build the project but running bms-to-inverter throws below error:
Exception in thread "main" org.jboss.weld.exceptions.DeploymentEx…
-
moin s10l
ich habe dein Programm jetzt Installieren können.
Leider Funktioniert es nicht so wie ich es gerne hätte.
Schreib mir bitte, dann könnte ich dir das Problem direkt zeigen mittelts T…
-
Where do I run this python script?
I.e. on a raspi in the same network or on the deye itself?
-
**Hardware (please complete the following information):**
- Inverter model:SUN-600G3-EU.
**Software (please complete the following information):**
- Logger firmware version: MW3_16U_5406_2.06
…
-
Hey, not sure if that is an issue in general or with the DC-DC Converter that i received.
For me only the outer 4 holes are close to identical(not perfect), but the 4 inner holes of the Converter d…
xF4m3 updated
9 months ago
-
**Describe the bug**
Ich nutze die aktuellste Version und erhalte den folgenden Eintrag im ioBroker Log:
```RangeError [ERR_OUT_OF_RANGE]: The value of "offset" is out of range. It must be >= 0 an…
-
### The problem
A modbus interface was built with an ESP32 and MAX485 modbus converter. Data is sent to a Macbook running Coolterm that has the ability to loop received data back. In debugging the …
-
Hallo,
Ich versuche gerade den Adapter für den Deye Michrowechselrichter zu installieren, leider bekomme ich es nicht hin.
Wo muss ich den username und das passwort eintragen?
Sg. Gerald