-
Hi, can you help me with the pinout of sx1262 waveshare board and an arduino nano 33 iot in order for the lorawan example to work ?
I don't know how to find the busy, nss or reset pins on the sx126…
-
Hi Alex,
I am in process of designing new PCB for home automation using Raspberry Pi Zero.I need your help in identifying proper pins for following hardware:
- I2C Bus for temperature, humidity,…
-
Hi i'm trying tu use this library with waveshare lora hat (https://www.waveshare.com/wiki/SX1268_433M_LoRa_HAT) based on sx1268 chip but unfortunately Pi does not recognize it - i've changed ic_model:…
-
## Information about the device + link
Aqara high precision motion sensor (RTCGQ13LM; lumi.motion.agl04)
It has 2 parameters for customization:
- Sensitivity adjustment (High; Middle; Low)
…
Otnow updated
2 years ago
-
What are the pros and cons with 115200 verses 57600 bit rate speed for Silabs EZSP serial protocol on EFR32MG1/EFR32MG2?
kirovilya brought up the question in https://github.com/Koenkk/zigbee-herdsm…
Hedda updated
3 years ago
-
Source: https://github.com/xreef/LoRa_E32_Series_Library
Tag: https://github.com/xreef/LoRa_E32_Series_Library/releases/tag/v1.5.0
It's a complete library to interfacing EByte LoRa E32 device (fro…
xreef updated
3 years ago
-
## What happened
Was adding a device via Homeassistant to zigbee2mqtt, everything was working fine, but at one moment all zigbee devices hang, giving me the error:
`Publish 'set' 'state' to '0xb…
-
Hardware : [ESP32 Lora board](https://easyeda.com/GabeH/esp32-lora-aprs) design by myself ([BV5DJ](https://www.qrz.com/db/bv5dj))
Lora : E22 SX1268
config: server mode (APRS-IS gate mode)
ERR:
…
-
Hi,
Please let me know if there is some way to check transmission Quality in E32 because I think they have no RSSI or SRN...
Thank you
-
Please consider looking at using Sonoff ZBBridge as a networked Zigbee adapter for zigpy & bellows
- https://www.itead.cc/sonoff-zbbridge.html
Would be very cool if we could use this new Sonoff …
Hedda updated
3 years ago