-
I got OctoPiPanel working fine on the Adafruit PiTFT 3.5", but the screen is not filled up due to the difference in resolution, 480x320. It would be nice if you could put the resolution into the confi…
-
I sue last picamera 1.8 on raspberry with last 09/09/2014 firmware from Adafruit (use of Pitft screen).
Some actions requiere very long time as :
- Camera = picamera.PiCamera() : 1.3s
- Camera.resolu…
-
Is it possible for fbtft to control the backlight via GPIO 18 when adafruitct28 is connected via I2c? I verified that GPIO 18 does indeed switch backlight on my device, but sure would be swell to hav…
-
Does the fbtft driver have support for the Pitft yet? also the custom image you are going to make for it, will it have it compiled into the kernel so it can be specified in cmdline.txt??
naleo updated
10 years ago
-
Following example given into 4.8 chapter regarding "capturing in low light", I try to specify long exposure time :
camera.framerate = Fraction(1, 6)
camera.shutter_speed = 6000000
But real ex…
-
Are you OK to use your code in an GPLv3 project? I'm working on an open software/hardware cycling computer (raspberry pi + PiTFT + pygame) and looks like your code will be perfect to impelment speed, …
-
When installing the custom kernel from Adafruit the display works fine. But when installing your kernel https://github.com/notro/rpi-firmware/tree/master I get following error message.
pi@raspberryp…
-
Hello, I saw that you recently added support for "adafruit28" and I was wondering if this is the same screen that I mentioned in the title? When I try to follow the installation instructions in the wi…
-
Hi,
I have a raspberry pi connected to some I2C sensors and GPIO relays and to a pitft, all controlled in pygame. When using the original drivers from the adafruit [website](https://learn.adafruit.co…
-
Cannot find RA8875 promised device using "sudo modprobe fbtft_device name=list".
Installed 2014-06-20-wheezy-raspbian-2014-07-25-fbtft-master-firmware, then sudo REPO_URI=https://github.com/notro/rpi-…