-
rigctl from latest master does not work with 3.3 rigctld or earlier 4.0 rigctld.
Some clients like Log4OM can no longer read frequency.
Appears the extra VFO parameter from 'f' is perhaps causing th…
-
```
$ bindings/pytest.py
bindings/pytest.py: Python 2.7.16; Hamlib 4.0~rc2
status(str): Command completed successfully
get_conf: path = /dev/Rig, retry = 5, ITU region =
freq: 5700000000.…
-
2020-04-26:14:20:50.492518: sync_callback: client lock engaged
2020-04-26:14:20:50.492518: rigctl(d): v 'currVFO' '' '' ''
2020-04-26:14:20:50.843160: sync_callback: client lock disengaged
2020-04-…
-
When trying to dump the memories of a uniden bc780xlt scanner we get the following error:
```bash
rigmem -m 801 -r /dev/dtyU0 -s 9600 -vvvvv save memdump.csv
rigmem, Hamlib 3.3
Report bugs to
…
-
To give you insight, I'm using Gpredict + rigctld to control my radio + rotctld to control my rotator.
Previously, I was using **20200405 snapshot build** which worked incredibly well on IC-910 to…
-
rig_get_channel is inconsistently implemented.
Some backends update the rig and some don't.
So we will add a read_only flag to the call so the client can ask for a channel and leave the rig as it wa…
-
- GPIO support is left out of man pages
- use examples of how to use hamlib with GPIO pins for PTT do not exist in documentation
- no raspberry pi specific build instructions in the wiki's documenta…
-
Whilst holding down the transmit on 433.500 with 5w power, l SWR shows 0.050980 whilst SWR is actually about 1.20
How do I turn the value from 'l SWR' into the actual SWR reading?
-
Hi, the build works fine, but when building another package, for example linhpsdr, the following happens:
gcc -o linhpsdr main.o css.o audio.o version.o discovered.o discovery.o protocol1_discovery…
-
When in satmode the IC-9700 is not returning to Main VFO after polling Sub
2020-06-12:06:57:46.589031: rigctl(d): I 'currVFO' '435340000' '' ''
2020-06-12:06:57:46.589044: rigctl_parse: vfo_opt=0
…