-
When I plug in the the power for the EBUSD V3, using the Wemos D1 mini shield AND connected to the ebus (with Bulex MIGO Wifi thermostat + Bulex ThemaCondens 30/35 heater also on the bus),
The EBUSD …
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…
-
I have a Wemos D1 R32 (basically an ESP32 with UNO layout) and I'm trying to make it work with an Original Arduino Ethernet Shield 2.
Here a link with a Wemos D1 R32 pinout description: [https://www…
-
**Is your feature request related to a problem? Please describe.**
No
**Describe the solution you'd like**
The same usage like the other screen sizes
**Describe alternatives you've considered*…
-
I recently bought a pack of 3 [ESP32 D1 MINI](https://www.az-delivery.de/en/products/esp32-d1-mini) that I intended to use with WLED.
Unfortunately it does not work out of the box, tried both `defa…
-
According to the datasheet for the [VXO7805-500](https://eu.mouser.com/datasheet/2/670/vxo78_500-1774699.pdf) the ceramic cap on the 5V side (C5 in the WLED-wemos-shield) is recommended to have 22µF (…
-
Hello
I'm very interested in the project
Are these shields supported? [https://docs.wemos.cc/en/latest/d1_mini_shiled/index.html#environment-shields](https://docs.wemos.cc/en/latest/d1_mini_shiled/i…
-
Could this setup support a single relay for local control of a device?
-
Please only submit bugs for **latest** main or devt branches. You can check the version number in the startup messgaes and compare it to the version in [grbl.h](https://github.com/bdring/Grbl_Esp32/bl…
-
Using 1.6.5 Arduino IDE with stable esp8266 distribution on mac osx. In the beginning (and still to this point) I always get the error:
warning: espcomm_sync failed
error: espcomm_open failed
when t…