-
The CAT works great, but if I installed Logitech's Control Center it tells me I have no wifi hardware installed. Any recommendations? I'm using a late 2011 MBP with a 4.0 Bluetooth card.
-
### The problem
The LD2420 sensor works fine with the NodeMCU. But when I connect to a MQTT Broker with esphome then I get weird values.
The values are jumping very high and then back again. Why cou…
-
2 days work, but still not working ....
and forgive my english...
`/**
* @file sdcard.ino
* @author SeanKwok (shaoxiang@m5stack.com)
* @brief M5CoreS3 MicroSD Card Test
* @version 0.1
* …
-
when i select arduino uno it compiles correctly....but on arduino due i get following errors:
In file included from c:\arduino-1.5.1r2\hardware\tools\g++_arm_none_eabi\bin../lib/gcc/arm-none-eabi/4.4…
-
Is MQTT required to have the door sensor working in Home Assistant?
I would expect that the binary sensor is exposed to HA, and the status of the binary sensor could be used to trigger automations.
…
-
### The problem
I purchased a WeiKai [WK2168 breakout from AlieExpress](https://www.aliexpress.com/item/1005007605743585.html?spm=a2g0o.order_list.order_list_main.11.51921802UtddRR) and it has not be…
-
### Describe the bug
When enabling client isolation in the WiFi settings this does not work for WDS clients (as those create separate bridge ports).
It would be nice if enabling client isolation on …
-
## Description of the problem
1. When I use the sketch without ws2812fx.service(); in loop() then everything works fine for several hours but when I include ws2812fx.service(); in loop() then MQTT …
-
When I configure the meadow using the following (which a linter says is valid) the network ends up using WiFi (0, which I assume is the default):
```
# Acceptable values for true: true, 1, yes
# Ac…
-
### What Happened?
I'm not sure the exact cause of it, but after I install updates, the WiFi settings always changed my preferred band to "Automatic" and I keep having to reset it to "A (5Ghz)". I tr…
D0J0P updated
3 years ago