-
Hey thank you for this great project! i have an issue with making the firmware for nRF51822, i don't know how to enter the public key in to the firmware. `/* don't make `const` so we can replace key i…
-
In EBYTE.cpp at line 263 in Reset() comments you have "Per the data sheet just send 3x 0x4C to the unit" - this should be '0xC4' in place of the '0x4C'. The code is correct.
Does this Reset() resto…
-
![image](https://user-images.githubusercontent.com/4564579/49326200-53891580-f503-11e8-8831-76f6a39bab51.png)
Something in the latest release has changed with speed estimate. It now is often wildl…
-
Hello. I am studying your library as part of an IoT project involving an Espressif ESP32 using an EBYTE E22-900T30S chip for communication. I am aware of the command set difference talked about in #20…
-
As discussed in #210, there are some modules and boards that do not follow the same RF switch arrangement as the TI Launchpad designs and these will need a new firmware.
Why do we need a switch in …
omerk updated
3 years ago
-
Hey Kris!
I have a breadboard Arduino that works with 8MHz external crystal on 3.3V. I use my E32-TTL-100 on this board. I set the Lora module's parameters via the parameter setting software create…
-
Good day!
Thank you for sharing project.
Have you tried to run it on very similar module: E32-433T30D ?
http://www.ebyte.com/en/product-view-news.aspx?id=108
Looks like it also use same STM8L …
-
Hi!
I buy an [Ebyte E18-TBH-01 USB dongle](http://www.ebyte.com/en/product-view-news.aspx?id=949) with [E18-MS1PA1-PCB](http://www.ebyte.com/en/product-view-news.aspx?id=121) onboard and CH340G as US…
-
I'm using the E28-2G4M20S with the pcb antenna and an arduino pro mini. It's powered using a 800mA 3.3V regulator.
The issue is that I can receive the data only when the two modules are 1 mm close.
…
-
![изображение](https://user-images.githubusercontent.com/8360230/56220169-adcce200-6070-11e9-87ec-ed44eda5c09c.png)
The guys from our community tried to use TI cc2530 modules from EBYTE with a new …