-
**Project description**
A graphical frontend for the CH341A EEPROM programmer
**Metadata**
* homepage URL: https://github.com/bigbigmdm/IMSProg
* source URL: https://github.com/bigbigmdm/IMS…
-
First off, thanks for your great project and your talk!
I still have some more questions about the hardware setup:
1. Has anyone had success with the **Raspberry Pi 3 B+** (+ **Pomona 5250**) on *…
-
このページは気がつくと更新されます。
It's written frankly, so even if it's automatically translated into English, it might not come across correctly.
進行中
- 古い設定ファイルを食わせると互換性がなくて segmentation fault
- https:/…
-
Some issues using Optiboot from @MCUdude's repo (Bigboot).
https://github.com/MCUdude/optiboot_flash/blob/master/bootloaders/atmega2560/16000000L/optiboot_flash_atmega2560_UART0_115200_16000000L_B7_B…
mcuee updated
2 months ago
-
As the title says, the documentation on how to install custom DSP programs (that is _after programming them in SigmaStudio_) is currently not documented.
My current state is that I adapted `Beocrea…
archi updated
4 years ago
-
Ok, so I've already modded my BIOS. So far I think it is working as intended. Some observations:
* You can undervolt directly on the BIOS, which indeed seems to work. Does anybody know a way to che…
-
Using this project causes so many writes to the heat pump's EEPROM that it should break in no time. Are you aware of that?
https://github.com/Egyras/HeishaMon/issues/225
-
esp-link can be used directly from Arduino IDE if the hardware/arduino/avr/boards.txt file in your Arduino IDE installation is updated with lines like this:
```
mega.upload.network.endpoint_upload=/…
-
One of the features found in some other print controllers is microstepping during a print, particularly with the Z axis. This allow fine tuning the print especially during the initial layer to impr…
-