-
If the bucket retention period on influxdb 2.1.1 is set to infinite, then the retention variable value is set to zero seconds.
This causes a crash on grott startup in grottconf.py.
I think because …
-
While atempting to change the IP adress to which the Growatt sends its data as described in:
https://github.com/johanmeijer/grott/wiki/Rerouting-Growatt-Wifi-TCPIP-data-via-your-Grott-Server#set-serv…
-
My grott instance receives data from the ShineLanBox but all packets are less than minimum length. My Inverter was recently installed, could there have been a protocol update? Or is something else wro…
-
When installing grott as a service, the service file links to /home/pi/growatt.
However, when you git clone the repo, it downloads itself to "grott".
Easy fix: change the installation manual to `…
-
Today I installed a MOD 5000TL3-X inverter and started up a grott docker container (v2.5.4 currently).
However, the returned values seem incorrect, any ideas how I can fix this?
It seems like the la…
-
I have setup grott and the ShineWifi-X USB device on my MOD 6000TL3-X inverter. Everything is working and data is coming into MQTT and HomeAssistant. Most values are correct (actuals, voltage, ...) bu…
-
Running this with a new 5000TL-X and have the following error message.
As an aside, how do I also revert the inverter to point back to growatt until this issue is resolved? I can't seem to reset i…
-
Hello, I have been using grott since today and got it to work quite easily with my MIN3000 TL-XE and ShineLink-X. There is however one thing that seems a bit strange: the Energy values are read as 0.1…
-
The stats I'm seeing in home assistant had some huge production spikes in it. So I then started to check what caused these.
I'm seeing some messages with huge production numbers in it. The one below …
-
I'm running Grott on Home Assistant OS and have managed to get some of the metrics to show as needed, but I need some customization to show more than just info for solar. In my setup I don't even use …