-
This code
```python
t_start = time.ticks_us()
for i in range(256):
tt.input_byte = i
t_taken = time.ticks_us() - t_start
print(f"{t_taken/1000}ms = {t_taken/256}us per set")
```
takes …
-
For context please see [this doc](https://github.com/peterhinch/micropython-samples/blob/master/encoders/ENCODERS.md) on the design of encoder drivers and [this driver](https://github.com/peterhinch/m…
-
- [x] Fix the reception / serve evaluation pairing
- [x] Add serving ace
- [x] dig player suggestion needs to know whether the libero is on court or not (assume not when middle is serving)
- [ ] sa…
-
Since the last revisions of the RP2040 Core I got the problem on Windows 10 64Bit with Arduino IDE 1.8.19 that after compiling the Arduino IDE is reseting my Pico to UF2 state
(Upload Method Default…
-
Is there any script/functions to use RP2040 DMA to read the I2C bus? Like how [this](https://github.com/raspberrypi/pico-examples/blob/master/spi/spi_dma/spi_dma.c) script reads the SPI using DMA?
-
This is just some rough notes of some issues I encountered with the Urban and how I managed to resolve them. I never worked with the Pico and only a little with embedded devices in general, so this is…
-
Simply powering up the WizFi360-EVB-Pico and monitoring it with mpremote shows that the board comes pre-loaded with a simple P.O.S.T.
It emits the following about once a second -
```
AT+CIPSTAMAC…
-
I designed a PCB for this great project, ordered with JLCPCB ($2 for 5 pieces, and $2 for shipping).
The PCB is only compatible for a quadcopter with wire for INAV 7.1.
The wiring diagram is in sect…
-
I have `usbipd 4.1.0` running on my Windows 11 Pro system. When I do `usbipd list`, I see this:
```
usbipd list
Connected:
BUSID VID:PID DEVICE …
znmeb updated
1 month ago
-
For hwmv2, there should be a match between the names and values of SoCs, this should take the form of:
```
config SOC_SERIES
default "nrf51" if SOC_SERIES_NRF51
default "nrf52" if …