-
Hello Harvey, thank you for this great tool. I'm having trouble finding timsy lc. What are some compatible devices if some of these aren't available?
-
Hello there,
there's a chance to add more option in output and modify default values for the others?
example:
the float voltage (battery_float_voltage) the possible_values (Optional, list): :…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### What part of EdgeTX is the focus of this bug?
Other (Please specify below)
### Current Behavi…
-
I've edited the font used by the clock.py example to "sans" and saved it back to the root of the Badger2040. It starts correctly, but it resets to the default time on every start, even if previously s…
-
Hi Mike,
Thanks for this project. Looks awesome!
I'm trying to get it working on my Rpi Pico W.
I'm struggling to run the test.py to see DMX channel information being received.
I wanted to check…
-
Arduino IDE 2 has built in debugger support but it does not seem to be available for any of the M0 feather boards. A couple of us (@kurtE) got it working for different processor and we would like to …
-
In pico.h, if I replace these lines
https://github.com/raspberrypi/pico-sdk/blob/1.4.0/src/boards/include/boards/pico.h#L80-L82
with this:
```
//#ifndef PICO_RP2040_B0_SUPPORTED
#define PIC…
-
I am back to zero.
Put 0.3.4 on one of my RP2040. Now blinking red
I only have PRI on 9, TLM on 10 and SEC on 13.
No GPS, no baro, no voltages.
Start the radio and the power up the RP2040.…
-
It seems that JTAG2SWD() in the current implementation resets some internals of the RP2040, actually after JTAG2SWD() the RP2040 AP delivers zeroes.
If JTAG2SWD() is commented out, it seems to work…
-
I am looking to place an order through JLCPCB. In https://github.com/pikvm/pikvm/issues/433 it was mentioned that costs were low. Is that only low if you solder everything yourself? I am not sure if I…