-
First thanks very much for doing this. I've wanted to move off the Loboris port to mainline MP for an old project, and a decent feature-full driver for my TTGO display was the sticking point.
I'v…
-
Trying to get my older MCUFriend shield to work with an WEMOS ESP32 Uno type board.
Did the hw mods - David´s mcufriend_kbv works fine - the diag says it is a HX8347D - code 0x4747
your read_us…
-
1. The README file mentions as optional arguments among others 'dc'. But when I do not specify dc I get a message: ValueError: must specify dc pin
2. A suggestion might be added about what to do …
-
### CircuitPython version
7.0.0
### Code/REPL
```python
git submodule update --init
```
### Behavior
When running `git submodule update --init`, the size is >8gb just for `circuitpyth…
-
The essence of the problem. It's global to me. On the verge of a complete rejection of `LVGL` completely.
I will give an example (purely theoretically). The `SPI` bus frequency is 40 MHz and cannot b…
-
Hello
I have used your firmware for a project that uses the TTGO Display and I have been able to get all the methods to work successfully but I have a problem using bitmap.
In the following code I…
-
Hello
I have a 2.4 AzDelivery TFT display (8bit parallel) and I can´t get it work with the TFT_espi library.
The manufacter says that is controlled by ILI9341 driver, and I test it with an Uno board…
-
### PROBLEM DESCRIPTION
_A clear and concise description of what the problem is._
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable boxes before…
-
Lvgl color display error, this is not the color I want
code:
lv_obj_t * label1 = lv_label_create(lv_scr_act());
lv_label_set_long_mode(label1, LV_LABEL_LONG_WRAP); /*Break the long li…
-
I've found that the timer-based synchronous hybrid micropython driver performs better on ESP32 than the async version. But when setting many display settings for various elements on screen, the upd…