-
### Cura Version
5.7.2
### Operating System
Windows 11
### Printer
Ender 3 V2
### Reproduction steps
Start G-code setting in Cura is set to this:
; Ender 3 Custom Start G-code
M413 S0 ; DPL…
-
- Full list of modules available here : https://github.com/OCA/OpenUpgrade/blob/15.0/docsource/modules140-150.rst
# Pending / done work
- [x] account - By @MiquelRForgeFlow - #3505
- [x] accou…
-
All of the Marker Grenades for the UBL have two RigidBody components, meaning they won't spawn or appear in arsenals.
`RESOURCES : GetResourceObject @"{2BA3B074AE0BFF82}Prefabs/Weapons/Ammo/Ammo…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
I have a problem with pausing and resuming prints. After I pause and resume, head parks twice, a…
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
Updated to MAY 2024 Rev.2 build. (Aquila_GD32_MM-ProUI-EX-05-23.bin)
I set the X maximum to 199.…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Pulled the latest version of Marlin Bugfix-2.1.x ([bb557e5](https://github.com/MarlinFirmware…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
At random points during the mesh levelling procedure, my CR touch probe will stow, but the Z-axi…
-
### Did you test with a precompiled firmware?
Yes, problem fixed. printer boots fine.
### Bug Description
When compiling MRISCO Source from scratch, causes Ender 3 S1 to soft brick and bootlo…
-
Cannot get the TFT35 touchscreen to work with octoprint using a MKS GEN L?
When removing the touchscreen, octoprint works normally.
How to fix this problem
-
Further to conversation about #5, suggest we consider enhancement to 1.0 version of the protocol that allows access to data about the state of an invoice/receipt by utilising gateway-generated GUIDs a…