-
When following the steps at https://watchy.sqfmi.com/docs/getting-started/#simple-watchface-example I get this output:
```log
[stuart@stugear 7seg-custom]$ pio run -t upload
Processing esp32dev (…
-
Feature request and heads-up; Silicon Labs is phasing out EFR32MG1x + older HW not included in newer Simplicity SDK versions:
EZSP protocol version incremented to EZSP v14 in Zigbee EmberZNet v8.0.…
Hedda updated
2 months ago
-
I’ve just installed a PN532 board, connecting it to the qwiic connector on the back of the TFT. The board powers up, but there doesn’t appear to be any communication.
1. On power up the PN532 boar…
-
MKS Robin Nano V3 with TS35 touch screen V2 - readme file is incomplete and does not result in compiled firmware.
https://github.com/makerbase-mks/MKS-Robin-Nano-V3.X/wiki/Marlin_firmware
Using …
-
### CircuitPython version
```python
Adafruit CircuitPython 8.2.4 on 2023-08-22; BPI-PicoW-S3 with ESP32S3
```
### Code/REPL
```python
import board
import busio
import sdcardio
import …
-
I have just upgraded 2x Raspberry Pis, one 3B+ with 2.90-14 Pi2, and one 3B with 2.90-14 Pi2 Large.
I have a Canable Pro which has been working for a few years with previous release and the manual in…
-
https://www.nvidia.com/en-gb/autonomous-machines/embedded-systems/jetson-nano/
GPU | NVIDIA Maxwell™ architecture with 128 NVIDIA CUDA® cores
CPU | Quad-core ARM® Cortex®-A57 MPCore processor
Mem…
-
The documentation states:
"This method performs a combination of one read operation and one write operation in a single Modbus transaction. The write operation is performed before the read."
Howe…
-
Base on the [example](https://github.com/tobozo/ESP32-USB-Soft-Host/blob/5cc393f3528038a66225840551d890cd7d8c15d1/examples/USB_Test/usbkbd.h) here, I added [ESP32 BLE Keyboard library](https://github.…
-
I'm looking for a way to install tow-boot via OTG port (without booting via mSD card into thegraphical installer)
On a Radxa Rock Pi 4plus the graphical installer does not react on keyboard input. …