-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
```
I am working on a servo controller using an TLC9540.
Problem is that I am not able to turn the servos more than +- 60 degrees using
the standard program for controlling servo's with an TLC9540. (…
-
Hi - I am searching for an easy way to control servos (Hitec HS-805) with the RasPi.
I tried to use the one plain "PWM" provided by the RasPi with wiringPi's GPIO which worked out-of-the-box but not w…
-
- Move Servos to Teensy, adjust power delivery for servos
- Remove Auto pHat
- Fix ROS2 nodes to point to teensy as appropriate
-
### Is your feature request related to a problem? Please describe.
_No response_
### Are you looking for hardware support?
_No response_
### Describe the feature you want
3D printers and DMX cont…
-
Hi
Thanks for publishing this, it seems to be the only ROS2 PCA9685 driver around, but I am very confused as to how it is setup. You talk about a steering servo, you talk about 4-Wheel steering, b…
-
how do you set up the min max on the servos. when i press any button the servos just jump and go back to where they were.
-
Interested in your ESP device, but wondering what it brings to the solution beyond the direct connection Pybricks can manage on it's own with the xbox controller? Thank you.
m10d updated
5 months ago