-
Hey Kris, I am new to arduino and IMUs in general and learning as I go. I am using versions of you code, which I have adapted to take any number of IMUs. I am working on a wearable device which might …
-
Tracking validation tests and bug reports for GalliumOS support on Apollo Lake models.
Please add observations for any Apollo Lake model in comments!
**Current Apollo Lake status**
- [x] `galli…
-
When users want to add special feature to their keyboard current API is obviously poor or doesn't allow them to do so. For example, LCD support: https://github.com/tmk/tmk_core/pull/2
# Event hooks(Ca…
-
Hi, I have an issue with the USB C from the board. When I boot my Xavier NX card with the board, I am not able to use a keyboard or a mouse. The card seems to boot normaly and I have the hdmi port whi…
-
Hi,
I have Surface Go 2 with keyboard cover. I have issues with touchpad settings after power-on, after reattach. Sometimes the touchpad behave differently then it is set up in Settings.
When I po…
-
Currently setting up XQEMU is a lengthy procedure, running it is complicated.
We should have:
* Open-Source replacement for the ridiculously hard to dump MCPX rom
* Open-Source replacement or p…
-
> ~~**Not bootable on SB1 !!!**. It reboots on chrome logo. (But works well on Surface 3... why?)~~
~~I released this binary anyway because it works with Surface 3. I'll look into what's happening …
-
Using RE to boot Tow-boot installer from SD because prw+vol.dn failed. This is the serial output.
-------
Tow-Boot TPL 2022.07
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row…
-
When I flash the firmware with UBL, the printer starts beeping and shows an error about Bed Temperature.
How can I fix it? Using latest version from Releases Page with UBL
-
My symptoms are remarkably similar to #603:
Roughly 1/10 times, the system fails to suspend and gets very warm. When I open the lid again, I can see that the LCD is on, but the screen is blac…
Biont updated
2 years ago