-
Hi,
I am using multiple End devices and facing a issue on packet forwarder
Packet Forwarder don't show all packet from end device but End Device get ACK from the Server, and no record of these pa…
-
**Proposed configuration:**
```json
{
"SX1301_conf": {
"lorawan_public": true,
"clksrc": 1,
"clksrc_desc": "radio_1 provides clock to concentrator",
"radio_0": {
"enable": true,
"ty…
-
This is a **bug report** for **the packet forwarder**.
The packet forwarder is not receiving RF messages set to SF8BW500.
We have a mote that is sending join messages (OTA) only on SF8BW500 and th…
-
This is a **question** for **{the packet forwarder}**.
I am trying to build on my kerlink gateway, but the build failed:
```
$make build
CFG_SPI=native PLATFORM=kerlink make all -e -C lora_gat…
-
### Is this a bug or a feature request?
Bug (I guess) - I don't know if it should be created here or in Lora-app-server
### What did you expect?
To receive each keep alive or communication message …
-
Is there anyway to run the same packet forwarder in TCP/IP mode, UDP over large networks is not advisable
-
In the EU version as a test I've centered Radio_1 on 869.5MHz in the gateway. This produces frequencies of 869.1/3/5/7/9. All of these frequencies lie within an allowed ETSI band.
When I receive th…
-
Hello
when we process the frames received from Gotthardp via a mqtt connector, the timestamp field ( tmst) contains strange value , not related to the real time stamp ( as seen by the lorawan server…
pdl86 updated
7 years ago
-
Hello,
I use this LoRa server with microchip base LoRa gateway and all is working well but now I switch to Kerlink Lora 868 IoT Station. I power up the gateway and install Autorun packet forwarder…
-
Just one simple doubt. Why use of UDP for lora-gatewat-bridge.. Can we configure this with TCP/IP???