-
I recently updated Printrun from github and clicked what (I later found out) used to be the home button. Before I realized what was happening, my Y-axis had crashed at the end of its travel!
On Pront…
-
### Setup
Firmware: 3.2.1 (did factory reset and redid calibration including e-correction)
Printer: MK3
### Steps
1. Move Z axis to some place (in my example it was at 25)
1. Turn off printer u…
-
Hi.
Let's say we have two version of website; English and German.
Let's also say that for SEO we want to be ranked for "motor homes".
As you know SEO ranking score for is also image name and alt.…
xApep updated
6 years ago
-
If I change the config.h file to enable CoreXY I get an error on uploading. I am hoping it is just something simple I an doing wrong.
```
vrdude: verifying ...
avrdude: verification error, first …
-
As a SANDALS scientist, I want to control the sample changer, so that I can control which sample is placed in the neutron beam.
#### Acceptance Criteria
1. I can use the IBEX GUI to control which …
-
Hi. I am having some issues with GRBL/bCNC on my small machine. It is set up as a plotter with a pen, and mostly seems to work right, however the z-axis limit is giving me lots of grief.
I can get…
-
it will not allow me to use a grid set up. it says no strategy path available and the 3 point doesn't work particularly well it only probes one area. seriously frustrating
-
Another guy where the Z axis isn't working. GRBL 1.1 with Protoneer CNC shield. All end stops functioning normally; if I drive the Z axis against the stop by jogging, it throws a proper error. Duri…
-
[sorry, i need to re-open the issue]
I obviously agree that i need to set the Z-axis, but i'm so confused about it.
The z-axis was correctly set with CURA until 5 minutes before. I've never heard you …
-
Reported by Ron Smith (Polaris)
As an instrument scientist I would like to be able to home my Galil axes reliably.
Ron came into the office and reported that homes were no longer working on one of h…