-
I have not determined exactly where this limitation comes from, but it looks like it is lwip or the layers below, possibly the wifi chip itself.
2920 is 2*TCP_MSS (1460), which is the max amount of…
-
When I have a look to the Wifi library I found some weirdness in WIFIUdp.h
Multicast starts with:
`uint8_t beginMulticast(IPAddress interfaceAddr, IPAddress multicast, uint16_t port);`
that is diff…
-
I've just provisioned 2 of the enviro indoor sensors and one of them is reading a good 4-5C above what I believe the room to actually be, is there a way of calibating the sensor or, alternatively, a w…
-
Hello,
I see some strange issue using the WiFi connection on a Raspberry Pico W board, it seems the WiFi connection leaks every some seconds. I'm getting a ping result of -1 in such case, where in no…
-
Post this as a feature request, here, so that the following can be integrated to the mqtt_as base class of object init scope as a configuration option, i.e. power management enabled or disabled.
…
-
I've been playing with the rain detection, with "manually" generated rainfall, and have identified another issue with the code as it stands.
When the system is put into sleep having woken from a ra…
-
Hey there, i want to open a secured access point with MP on the new Pico W like so:
```py
ap = network.WLAN(network.AP_IF)
ap.active(True)
ap.config(essid='PICO', password='12349876')
```
The …
-
Are you planning to support the Raspberry Pi Pico W? I'm assuming that all this would involve is adding to the list of functions callable by SYS those necessary to access the network stack (and then …
-
P06 item | UCUM code | QUDT item to be requested
--- | --- | ---
| Bq.s.m-3 | unit:BQ-SEC-PER-M3
| dbar.a-1 | unit:DeciBAR-PER-YR
| Cel.a-1 | unit:DEG_C-PER-YR
| deg.m-1 | unit:DEG-PER-M
| …
-
```
What steps will reproduce the problem?
1. select any part to edit
2. do some edits on a part
3. Save as new part
What is the expected output? What do you see instead?
New part created.
Instead g…