-
Im running PiSDR 3.0 on Pi4. SDRAngel works with my PlutoSDR, but not GNURadio. When I add the PlutoSDR Sink or Source Blocks to my flow graph and press execute I get the following error:
/*-------…
-
I know the PlutoSdr is directly supported by SdrAngel and there is no need to use SoapySDR with the PlutoSDR so this issue is not critical but I thought I would report it anyway for information purpos…
-
Hi:
As you will see in error captured from the Python shell, I'm running 3.7.3 on a 64 bit Windows 7 computer. I installed libm2k for windows using libm2k-system-setup.exe from this Appveyor build:
…
-
**Steps for reproduce:**
1. Start application
2. Set transverter frequency (-120MHz in my case) and enable frequency translation
3. Set LO frequency (7MHz)
4. Restart application
**Expected R…
-
Hi ,
I'm trying to run srsLTE on xilinx ZC702. I'm using soapysdr driver and soapyplutosdr.
srsLTE (18.12.0)
I'm facing following issue when I run it srsENB,
Built in Release mode using commit d…
-
Hello,
I am trying to use my plutosdr with QUISK and it only works in RX mode and not in TX mode. I strongly suspect the problem is not with QUISK or SoapySDR but the SoapyPlutoSDR module that seem…
-
Ubuntu 18.04
Gnu Radio 3.8
GRC 3.8.0.0
branch: upgrade-3.8
When running a flowgraph with a PlutoSDR as the output device, I get the following warning:
Generating: '/home/barry/RTTY_transmit/RTTY_…
-
**TL;DR** Made a few minor patches to build Redhawk 2.0.7 for Debian 9 and Raspbian Stretch posted [here](https://github.com/timcardenuto/core-framework/releases/tag/2.0.7-1). There were some issues …
-
Hi,
I noticed that sample rates between 25e6/48 and 25e6/12 don't work. I found the answer in the [Linux IIO driver notes](https://wiki.analog.com/resources/tools-software/linux-drivers/iio-transce…
csete updated
4 years ago
-
After installing gr-iio with Python 3 for GNU-Radio 3.8, updating parameter in PlutoSDR Source block gives the following output then freezes the program:
```
thread[thread-per-block[0]: ]: pmt_to_lo…