-
Hi
I am using Michael Black's fork from May 3rd on a RigPi (Raspbian
Buster Pi4)
I am playing with my FT-991A and I am surprised that I cannot set FM
mode. I can set PKTFM.
caps show:
Mode…
-
Running rigctl for IC7100 (rig 341), the ci-v address output is not the value in priv_caps. If I use the -c switch with the correct value, that works OK. If I edit the value in ic7100.c, it still outp…
-
I merged the latest upstream with my fork & rebuilt. Now I get "rig_open: error = Invalid parameter" when I run rigctl.
Attached is my console output showing the previous rigctl startup, the rebuil…
-
As an alternative to a hardwired modem, trying to interface to a software based sound modem, called DireWolf. In the main.c source code, changing line 55 from conf.device = argc == 2 ? argv[1] : "/d…
N6RFM updated
4 years ago
-
Good afternoon;
I am receiving an error when attempting to configure a Yaesu FT-900 in WSJT-X.
My settings are as follows:
- Baud: 4800
- Data Bits: 8
- Stop Bits: Two
- Handshake: None
-…
ghost updated
4 years ago
-
Hi!
Noticed that the hamlib with ts-590 is not reporting the split frequency via cat when transmitting. If you press TF-SET on the rig, the frequency is reported correctly.
Omnirig and dx comm…
-
I cannot continue a connection to my TS-2000 (using -m 214) because of a communication timeout. HamLib seems to initially connect and the PC connection indicator comes on my TS-2000. Then it goes a…
-
I am using a QRPver Minion Mini, which has implemented a CAT interface using the TS-440 command set and having issues with hamlib.
rigctrl receiving at any send cat command a ?; as response from th…
DK4FT updated
4 years ago
-
With the FT-950 tuned to 7.125 MHz LSB, rigctl m command returns USB. The debug log shows MD01; which should be LSB. Here is the debug log:
Radio is set to 7.251MHz LSB
Rig command: m
rigctl…
-
It appears the code to power up the TS-590S is missing. Hamlib 4.0 latest. Log is below.
Howard W6HN
--------------------------
pi@rigpi4:~ $ sudo rigctl -m 2031 -r /dev/ttyUSB0 -t 4532 -s 11…