-
Is it possible to support the RP2040 build environment?
Would be appreciated
PR - https://github.com/RobTillaart/MCP_DAC/pull/16
-
For single Pico PIO setup. Keyboards operating in USB Low-Speed 1.5Mbps mode are not recognized.
-
Since we talked about PWM:
It seems that the ports behave different with respect to PWM. The esp32 and mimxrt ports start as soon as the PWM object is instantiated, albeit with different frequencies.…
-
We do have a discussion started by Doro here in a German forum about voltage and current under SPORT.
So I had the idea to do some tests here under ELRS.
**My 1st notice, both voltage and curren…
-
Some I2S codecs require a MCLK signal which is 64/128/256*fs. This signal needs to be aligned with the bit clock (BCLK).
Adding master MCLK support would extend the support to many more widely availa…
-
I appoligize in advance if this is not where i should be looking for the "support" / guidance on this
## Bug report
Hello i am getting this in the log/consol after following the guide.
is the e…
fanno updated
7 months ago
-
I have the adafruit 4650 OLED display working on the RP2040 using circuitpython along side one working on an RP2040 using Micropython, each using its prospective driver. Both work nicely with the exce…
-
Hello and thanks for the great library
a question, I'm probably asking myself too stupid
the library supports multiple dmx outputs
how are the universes mapped to the exits
and can you define the …
-
On MacOS, with a RP2040 Zero board.
- connected to the board with the USB workflow
- allowed access to the drive (not called CIRCUITPY)
- write in a new file `print("Hello")`
- save as "text.py"…
-
Hi!
I'm having some trouble compiling my code after adding this library.
Most likely I'm doing something dumb, but would appreciate any input.
I include and initialise it like this:
```
#includ…