-
### Description
- Type: Question on API-changing (or clarifying) Enhancement
- Priority: Minor, but probably only because CAN isn't used that much
### CAN API issues
Since this is an issue with …
-
I wonder if this library can be used for other chips, like STM32F103, STM32F303 or STM32F405. From a quick check to the reference manual it seem to me that the F103 and F303 have the same USB peripher…
-
hi,
Is there any mbed library that provides DMA library for STM32. I am try to run ADC through DMA. How can I implement it? Should I just straight away use the STM32 Hal? I think this way is so no…
fwndz updated
6 years ago
-
I experienced hard faults with the generated linker for my STM32F3 Discovery board. After a long puzzle, I used a linker file from the CMSIS directory:
`SET(STM32_LINKER_SCRIPT /home/bart/STM32Cube…
-
int parity can be one of these:
#define UART_PARITY_5N1 0x00
#define UART_PARITY_6N1 0x02
#define UART_PARITY_7N1 0x04
#define UART_PARITY_8N1 0x06
#define UART_PARITY_5N2 0x08
#define UART_PARI…
-
I'm trying to build a very low-cost, all-in-one quad. Similar to the CrazyFlie, but more like in the $35-$50 price range.
Originally I wanted to implement it on an ESP32, but according to #2970 be…
-
Support configurable sample sizes and running strategies to obtain samples, such as performing a linear regression on increasing loop counts.
-
Hello,
i have a Naze32 Rev5 on mu drone u used the firmware 1.7.0 from cleanflight and was all good , so i have add sonar on mu drone and open the cleanflight to activate it, but on cleanflight i ha…
-
Hello Jorge,
I like your new API version 2 a lot and I wanted to it try out with my STM32F3discovery board.
It seems that this crate is outdated. Do you plan to upgrade?
-
I am pretty sure this is a know issue [https://github.com/betaflight/betaflight/issues/2162](url) but problem with the Femto is its an AIO with only 4 dedicated motor +/- and signal pads so remapping …