-
First of all thanks for this awesome shield! I just assembled my first v1.5 bare minimum board + temperature sensor. However, I was not able to turn the LEDs on on the first try. A look at the schemat…
-
Hi,
thanks for building this, just wanted to let you know that i built a PCB for this code.
its not been tested yet but i will report back when its been tested:
https://easyeda.com/raptordemon/…
-
Hello,
and thanks for the nice project.
I have built the board in Version 1.3.
Sadly, it is not working, and I have no voltage output on the output pins.
So far, I have checked PIN D6 which sh…
-
Hallo,
is it Possible to Update the BOM, to show wich Part you need for wich Option ?
Because you Updatet your list but if you have an older version it dosent match anymore.
I have done it fo…
-
This is a "rare" case that i detect on my system.
On this case im using a **DSC PC1832** alarm panel and **DSC UA521** RF receptor.
My system got 30 wireless zones, 27 RF reed switch, 3 wireless i…
-
Dear Mr. Hoang,
I am trying your very good DDNS_Generic library using no-ip provider having a classic ESP8266 board (WeMos D1 mini).
What I want and I haven't find the way to do, is to get somehow m…
-
My bug is simply randomly losing some of the pin assignments and altering the led numbers per pin output, also glitching when driving more than one set of WS2813-E as I understand there is a reset tim…
-
Backup my current hyperion config and import into hyperhdr while installing as a systemd service on a retropie image?
RPi4 - Retropie
LEDs - https://www.amazon.com/dp/B01CDTEJBG?ref=ppx_pop_mob_ap_s…
-
This library looks like the perfect addition to our project, thanks for all the effort!
Is it possible to run the code on the Arduino Due as well? Has anyone figured out the wiring for it yet?
MISO,…
-
I tried to run the code on a Wemos D1 Mini board.
First, the compiler threw an error, which I fixed like this:
Line 30 in print.h:
fdevopen( &serial_putc, 0 );
Needs to be changed to:
Seria…