-
Hello,
Using Arduino 1.8.3 IDE, the latest version of your repo and the 1.3.0 version of the USB host shield library, even though the code compiles fine, there is no activity on the MFD of the joys…
-
hello,
I have 2 module LoRa Radio Shield for Arduino - 900 / 915 MHz. but i haven't gateway. and i want connect them by p2p mode. but I not found a example about that. can you help me that problem?
-
Hello:
I used Arduino UNO with USB Host Shield, and they can work, but I found USB Host Shield SS pin is high.
In MAX3421E data sheet, if SS pin is low, then SPI data can transmit.
As far as I und…
-
# problem:
after i connected my usb host shield with my arduino uno and i ran the sketch for PS4USB i see in the serial monitor
`OSC did not start`
and the controller doesn't even connect because i…
-
```
What steps will reproduce the problem?
1. Use any of the example sketches that instantiate the WiFiServer that come
with the WiFi shield and load it up. ie. WiFiChatServer
2. Take your arduino+wi…
-
```
What steps will reproduce the problem?
Method A:
1. Open the root of an SD card
root = SD.open("/");
2. List the files with the example code
printDirectory(root,0);
2A. All files on card show up.…
-
```
What steps will reproduce the problem?
Method A:
1. Open the root of an SD card
root = SD.open("/");
2. List the files with the example code
printDirectory(root,0);
2A. All files on card show up.…
-
```
What steps will reproduce the problem?
Method A:
1. Open the root of an SD card
root = SD.open("/");
2. List the files with the example code
printDirectory(root,0);
2A. All files on card show up.…
-
Hey I am currently working on a tracking device with LiPo battery and BLE, I fount that if the device is not booted using the USB connected as serial port the GPS shield attacked to a Arduino MKR 1010…
-
I have a enc28j60 module (not shield) and want to connect it to arduino mega 2560 and use this library
What pinouts sholud i connect to which pin of arduino?