-
With the recent commit to both [this patcher](https://github.com/dortania/Opencore-Legacy-Patcher/commit/50e3e08ff0e4e824c99492b71961c0dcff143cf1) and [OpenCorePkg](https://github.com/acidanthera/Open…
-
Hi!
I need your help in debugging. At this moment i have implemented in "libusb-patches" branch the functions for bit-banging. All HW connections are like here: [i2c rs232](https://i2.wp.com/sciencep…
-
Hi, markkpa! Thanx for your setup!
I have the same rig:
MB: Huananzhi X99 F8D
CPU: 2x Xeon E5 2678 V3
I've flashed my bios with your file and used your EFI to boot macOS Mojave (I'm working with…
tarkh updated
3 years ago
-
I had followed the [guide](https://khronokernel-2.gitbook.io/opencore-vanilla-desktop-guide/post-install/post-install/msr-lock) with my T450s, but it didn't work.
I wonder if you can fix the problem?…
-
I have a ch341a programmer and atmega328p MCU
your response will be appreciated.
-
Great config & mini guide. Thanks for taking the time to create this!
Did you have to do anything special (like ROM updates on the motherboard) to get Thunderbolt hot-plug to work on the Z390 Desi…
-
Hi everyone
I bricked my two iMacs installing BigSur 11.1 Update! It worked well with first release of BigSur, then troubles happened after updating process. I bricked the first one, though it was …
-
Carlinkit and CPLAY2Air come in a few varieties, ie one for "factory" head units, and one for "android based" head units. If the firmware is identical between these, how does it know the difference?
…
-
his chip is found on an GL3520 board (USB 3.0 Hub), which I took apart to read its name and tried to dump.
I can't read from the chip too reliably while in circuit. I mostly get the message that no…
septs updated
3 years ago
-
@tlaurion,in order to check out if my ch341a works,I reflashed the x220 with the Heads.rom that I still had.It all works,but one thing is still the same:the OS on the HDD could only start after making…
ghost updated
3 years ago