-
I'm writing a MicroPython driver for your board. In my testing it is only possible to change the device mode if you first change the mode to `_CONFIG_MODE`. Unfortunately I don't have any hardware cap…
-
I experience a hard crash when I use stage module with circuitPython 4 beta 7 recompiled with CIRCUITPY_STAGE = 1 option.
I tried the demo example (ball) and the jumper game. Each time, the game laun…
-
Hi all, is there listed support for the newer Feather M4 Express boards from Adafruit? It seems that the M0 Express boards compile FastLED just fine, however, the SAMD51 boards throw a spew of conflic…
-
Since ItsyBitsy M4 is a viable main MCU board to use with the ESP32 co-processor, would be nice to be able to use the built-in DotStar as the status pixel instead of adding an external NeoPixel.
-
Trying to use ArduinoMenu with board Adafruit ItsyBitsy M0 Express (framework = arduino in Platformio)...
It seems that the input characters are treated incorrectly... somehow delayed or lost. So it …
-
Hi,
Glad to see a library for this crypto chip and am keen to give them a try on some of my Adafruit ItsyBitsy M4's.
Assuming I will need to adjust the I2C bus as my chips aren't being picked up…
-
Boot_out.txt contents:
Adafruit CircuitPython 3.0.0 on 2018-07-09; Adafruit ItsyBitsy M4 Express with samd51g19
Steps to replicate issue:
1) Plug in ITSYM4 Express to USB port, green led animates…
-
Using beta 7 I was testing some i2c address code and needed to scan the bus on the REPL, then tried to re-start the code and was sent into safe mode.
code.py:
```
import time
import board
impor…
-
The ure module is present on the Feather, ItsyBitsy, & GrandCentral, but not on the Feather nRF52840.
-
Using an ItSyBitsy M4 connected to this RTC
https://learn.adafruit.com/ds3231-precision-rtc-featherwing/overview
I'm seeing
AttributeError: 'module' object has no attribute 'DS3231'
after the …