-
### Week 10 updates
- Interface USB camera with Raspberry PI
- Face mask detection code run in Raspberry PI
- Check procedure to headless Raspberry PI
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
I have camera positions and rotations from a camera alignment ([4x4 transformation matrices][1]). Visualizing them with [open3d][2] works fine. The following code produces the scene below with the obj…
-
After some prototype runs with a digital camera, now i want to pick a camera/lens for the permanent setup …
At 60m distance and catenary wires usually at 5.5m height, i have calculated i'll need a …
-
I have installed MotionEye on a Pi3, using the latest Jessie and MoionEye software (Not MotioEyeOs as i could not get my scavenged laptop camera to work with MotioEyeOS).
Everything works on a Pi3, i…
-
# Headless pi with Remote Desktop using VNC
Window:
Download pi imager https://www.raspberrypi.org/software/
Run and set config parameters eg hostname, enable SSH, WIFI connection info
Mac:
Dow…
-
Hello,
I have a fairly complex app running flask, picamera2 and autofocus on boot.
I am often getting this message
```
[0:05:43.417007419] [1582] WARN V4L2 v4l2_videodevice.cpp:2007 /dev/vide…
-
I set `camera.awb_mode = off` and `camera.awb_gains = (1,1)` in my script to record images.
After setting above, I check the value of `camera.awb_gains`.
On Raspberry Pi 3B+, the values look fine.
…
-
I can try to connect PI camera that is connected to the PI with a ribbon cable adding command in configuration.yaml with the only line rpi_camera: but is not recognize in UI and in motionEye ( i…
-
Hello,
I am currently using the Raspberry Pi HQ-camera with a Rasperry Pi 4b and picamera2, which works really nice.
I wanted to compare the HQ camera to another sensor, the IMX178M (from veye; …